Bio-Industrial Opportunities: Extrusion

 
 
Subscribe to our free E-Newsletter, "Agri-News" (formerly RTW This Week)Agri-News
This Week
 
 
 
 
.

Extrusion and Compounding
.
Extrusion is a process to create new materials or to generate a new property. At the Bio Processing Innovation Centre, the Century CX-40 HT extruder can compound material and extract value-added chemicals from biomass. The pilot scale extruder allows companies to scale up their concept before commercialization. When appropriately adjusted, the feeding rate ranges from kg/hr to hundreds of kg/hr. The 40 mm twin co-rotate extruder can be used as a device to research and develop new products/processes, and to scale up your recipe and process on pilot production.


Alberta Agriculture & Forestry
Bio-Industrial Opportunities Section
O.S. Longman Building
4th Floor, 6909 - 116 Street
Edmonton Alberta T6H 4P2
Phone: (780) 644-8118
Email: biobranch@gov.ab.ca


Bio Processing Innovation Centre - Grand Opening and Open House

September 21, 2017
1:00 - 3:30pm
5520 - 36 Street, Edmonton, AB

Click here to register.


  • Compounding: blending and compounding of natural fibre with biopolymer to make new materials
  • Reactive vessel (extraction and pre-treatment of raw material): continuously extract value-added components from biomass and other agricultural waste streams; pre-treat of biomass to improve efficiency of downstream processing
  • Thermal reactor: allows controlled temperature and pressure parameters of extruder to develop new products and processes
Injection Molding

Specimen preparation for mechanical property testing, optical testing and rheometry. The Thermo Scientific™ HAAKE™ MiniJet Pro helps to optimize the development process, enabling testing of mechanical properties for specimens ranging from 2-12.5 mL.
  • Specimen: several molds such as ASTM D638 Type IV and ISO 527-2-1A are available
  • Small prototype: other standardized molds for common mechanical testing as well as customized molds can be ordered upon request
 
 
 
 
Share via AddThis.com
For more information about the content of this document, contact Victor Cheng.
This information published to the web on May 22, 2014.
Last Reviewed/Revised on October 25, 2017.